Products HomeBNC Cables
- BNC to BNC Cables
- SMA to BNC Cables
- SMB to BNC Cables
- SMC to BNC Cables
- MMCX to BNC Cable
- Screw Terminal Pins to BNC Cables
CA2824
CA3124
Screw Terminal Pins
SMA Male Connector
CA2106
BNC Male
Connector
BNC Female
Connector
Please Wait
| Quick Links |
|---|
| BNC to BNC, Ø0.2" |
| BNC to BNC, Ø0.1" |
| SMA to BNC |
| SMB to BNC |
| SMC to BNC |
| MMCX to BNC |
| Screw Terminal Pins to BNC |
| Cable Racks |
All the cables sold by Thorlabs that have a BNC connector on at least one end are displayed on this page. The links in the table below will take you to web pages containing our other varieties of electrical cables.
| Electrical Cables Selection Guide | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BNC | SMA | Premium Microwave Cables | SMB | SMC | SHV | MMCX | 6-Pin HIROSE | USB | Banana Patch Cords | Piezo | Stepper & DC Servo | Detector Power Cable |
| Posted Comments: | |
Ben Huang
(posted 2024-05-15 20:03:34.923) Hello, what is the tensile strength of the 2249-C-24? Thank you! cdolbashian
(posted 2024-05-24 10:26:18.0) Thank you for reaching out to us with this inquiry. These are standard BNC cables, and we have not measured them directly for tensile strength as they are not designed to be load-bearing. I have contacted you directly to discuss this and your application, requiring load-bearing electrical cables. |
Zoom
- 50 Ω ± 3 Ω Impedance
- DC - 4.0 GHz Frequency Range
- 500 VRMS Working Voltage
- Tarnish-Resistant Brass Body
- Stress-Relief Connectors
- Ø0.2" Cable Outer Diameter
- RG-58 Cable
Zoom
- Increased Flexibility
- 50 Ω Impedance
- DC - 4 GHz Frequency Range
- 500 VRMS Working Voltage
- Tarnish-Resistant Brass Body
- Ø0.1" Cable Outer Diameter
- RG-174 Cable
Zoom
Click for Details
Boot Style May Vary
Click to Enlarge
Boot Style Pictured Above is Only Representative
- Available in 6" to 72" Lengths
- 50 Ω Impedance
- DC - 4 GHz Frequency Range
- 750 V (RMS) Dielectric Withstanding Voltage
- 250 V (RMS) Working Voltage
- RG-316 Cable
Zoom
- SMB Female to BNC Male Connector
- Straight SMB: 12", 24", 48", or 72" Long Cable
- 90º SMB: 12", 24", 36", 48", or 72" Long Cable
- 50 Ω Impedance
- DC to 3.0 GHz Frequency Range
- 1000 V (RMS) Dielectric Withstanding Voltage
- 0.40" (10.2 mm) Minimum Bend Radius
- No Bare Brass, Suitable for Use in Laser Systems
These SMB female to BNC male cables are available with either a straight or 90º SMB connector. The BNC and right-angle SMB connectors are made of nickel-plated brass, while the straight SMB connectors are made of gold-plated brass. The RG-178 coaxial cable is flexible enough to reach a minimum bend radius of 0.40", and the 90° SMB connector (Item #s PAA2xxR) allows the cable to be connected in tight areas without putting lateral force on the connection, making this cable ideal for use in space-constrained setups.
These SMB cables can be used with our line of Polaris® mirror mounts with piezoelectric adjusters, which can be driven via these cables by our open-loop piezo controllers.
Zoom
Click for Details
Boot Style May Vary
- Available in 6" to 72" Lengths
- 50 Ω Impedance
- DC - 4.0 GHz Frequency Range
- 750 V (RMS) Dielectric Withstanding Voltage
- 250 V (RMS) Working Voltage
- Ø0.1" (Ø2.5 mm) Cable Diameter
- RG-316 Cable
Zoom
- MMCX Male Connector to BNC Male Connector
- Available in 1 m and 1.8 m Lengths
- DC - 6 GHz Frequency Range
- 50 Ω Normal Impedance
- 170 V Max Operating Voltage
Each of these RG-174 coaxial cables features a male MMCX connector on one and a male BNC connector on the other. They can be connected to I/O ports on the Kinesis® Vertical Translation Stage and Kinesis® 30 mm XY Stage for external triggering applications.
Zoom
Click to Enlarge
Connector ends of the CA2024 and CA2106 cables
- Screw Terminal Pins to BNC Connector
- Female BNC: 6" Long Cable
- Male BNC: 12", 24", 48", or 72" Long Cable
- 50 Ω Impedance
- DC - 1 GHz Frequency Range
- RG-174/U Cable
Each of these RG-174/U coaxial cables features a male or female BNC Connector on one end and two pins for screw terminals on the other. They can be connected to the output connectors of amplified detectors and are compatible with Thorlabs' line of BNC electrical adapters.
Click to Enlarge
Drawing of the Screw Terminal Pins-to-Male BNC Connector Featured on CA2024 and CA2048 Cables
Click to Enlarge
Drawing of the Screw Terminal Pins-to-Female BNC Connector Cable Featured on CA2106 Cables
Zoom
- Wall Mount Cable Racks
- Store Cables Straight and Untangled
The WMR14 is a test lead holder for wires up to 0.26" (6.6 mm) in diameter and has 14 slots for cables. It is ideal for holding fiber optic patch cables.
The WMR9 is a test lead holder for wires up to 0.45" (11.4 mm) in diameter and has 9 slots for cables. The wide slots are ideal for holding power cords and heavy duty cables.
These wall mount cable racks are made from cold rolled steel with a baked enamel finish. The WMR14 is 11.00" (279.4 mm) long and the WMR9 is 10.96" (278.5 mm) long. Both racks extend outward from the wall by 3.51" (89.1 mm) and feature two mounting holes that are separated by 6.63" (168.3 mm).
BNC Cables